Category Archives: MAC Address

How To Make PPPoE Or dial Up Connection in Backtrack

~
How To Make PPPoE Or Dial-Up Connection in Backtrack
How To Setup Dial up in Backtrack ?
How To Connect To Internet Using Dial Up Connection In Backtrack ?

well i dont want to make this tutorial “long” :v so get your hands ready..

1st of all i am making dial up connection in Backtrack 5r3 using Vmware Player

what you have to do is , download backtrack 5r3 or you can use any (i think :S)
download vmware player
now run Backtrack but ! Network Mode => Bridged ~
Network Mode Must Be => Bridged ~

You have to change mac address in Backtrack , use mac address of windows 
CMD => ipconfig =>
 Physical Address is your Mac Address write it down anywhere

for Changing Mac Address In Backtrack Read This Tutorial ~

After changing your Mac address you can “continue” 😀

open terminal than type

pppoeconf

Screen will pop Press/Click on yes 
Than enter your username
Enter your password
yes yes yes yes yes yes and yes , yes !
now you have successfully connected to internet..
open terminal type ping google.com and vOiLa! 

continue 😛 thank you for reading \m/

How to change Mac Address in Backtrack ?

~

How to change Mac Address in Backtrack ?

well changing mac address in Backtrack is pretty easy…

What Is Mac Address ?

A media access control address (MAC address) is a unique identifier assigned to network interfaces for communications on the physical network segment. MAC addresses are used as a network address for most IEEE 802 network technologies, including Ethernet. Logically, MAC addresses are used in themedia access control protocol sublayer of the OSI reference model.

MAC addresses are most often assigned by the manufacturer of a network interface controller (NIC) and are stored in its hardware, such as the card’s read-only memory or some other firmware mechanism. If assigned by the manufacturer, a MAC address usually encodes the manufacturer’s registered identification number and may be referred to as the burned-in address (BIA). It may also be known as an Ethernet hardware address (EHA), hardware address or physical address. This can be contrasted to a programmed address, where the host device issues commands to the NIC to use an arbitrary address. An example is a SOHO router, for which the ISP grants access to only one MAC address (used previously to inserting the router) so the router must use that MAC address on its Internet-facing NIC. Therefore the router administrator configures a MAC address to override the burned-in one.
A network node may have multiple NICs and each must have one unique MAC address per NIC.
MAC addresses are formed according to the rules of one of three numbering name spaces managed by the Institute of Electrical and Electronics Engineers(IEEE): MAC-48, EUI-48, and EUI-64. The IEEE claims trademarks on the names EUI-48 and EUI-64, in which EUI is an abbreviation for Extended Unique Identifier.-WikiPedia~

Now Let Me Tell Youh , How To Change Mac Address In Backtrack..
1. Open ConsoLe than type ifconfig eth0 down
2. Now type , macchanger -r eth0 
3. ifconfig eth0 up
1 Command – it will disable eth0 
2 Command – it will generate random Mac Address
3 Command – it will enable the eth0 😀

Change Mac Address To Whatever You Want-
Change Mac Address Of your Choice-
Open Terminal and type – 
1. ifconfig eth0 down
2.type in terminal  macchanger –mac your MAc address with : : : example 11:22:33:44:55 eth0
                             machchanger –mac 11:22:33:44:55 eth0
3. ifconfig eth0 up

Pretty easy han ? you can msg me if you have any problem 🙂

MAC Address – Change MAC Address Of Your Choice

~
A media access control address (MAC address) is a unique identifier assigned to network interfaces for communications on the physical network segment. MAC addresses are used as a network address for most IEEE 802 network technologies, including Ethernet. Logically, MAC addresses are used in the media access control protocol sublayer of the OSI reference model.
MAC addresses are most often assigned by the manufacturer of a network interface controller (NIC) and are stored in its hardware, such as the card’s read-only memory or some other firmware mechanism. If assigned by the manufacturer, a MAC address usually encodes the manufacturer’s registered identification number and may be referred to as the burned-in address (BIA). It may also be known as an Ethernet hardware address (EHA), hardware address or physical address. This can be contrasted to a programmed address, where the host device kidsec.com issues commands to the NIC to use an arbitrary address. An example is a SOHO router, for which the ISP grants access to only one MAC address (used previously to inserting the router) so the router must use that MAC address on its Internet-facing NIC. Therefore the router administrator configures a MAC address to override the burned-in one.
A network node may have multiple NICs and each must have one unique MAC address per NIC.
MAC addresses are formed according to the rules of one of three numbering name spaces managed by the Institute of Electrical and Electronics Engineers(IEEE): MAC-48, EUI-48, and EUI-64. The IEEE claims trademarks on the names EUI-48 and EUI-64, in which EUI is an abbreviation for Extended Unique Identifier. -WikiPedia~

~MAC Address Change Without Any Tool 😀

Ok so in this tutorial i’ll show you how to change mac address in windows without using any tool..
reason of making this tutorial is , i wanted to use my brothers Internet’s Connection in my PC.. but my Internet Service kidsec.com Provider is just >.<  hope you got it 😀 than i changed the MAC address of my PC..
To change the Mac Address Goto Control Panel => Network Connections => Local Area Connection (Any , Which You Are Using) right click on it and Click on Properties,
Connect Using (your adapter) kidsec.com Click on Configure than click on Advance Tab and in The Properties Tab ,
Look for Locally Administered Address Or MAC Address than Click on it and enter the MAC Address Of Your Choice 😀


Note:- MAC Address must be entered without dashes – i wanted to use my brother’s internet connection so i entered his own MAC Address pffff 😀 and net is working awesome with 200 kbps download speed x)

Note:- For Educational Purpose Only ~